Watering large floral foam products

For large plug-in foam products, the conventional watering method will hardly be used. For watering such large-area products (e.g. OASIS® BIOLINE® Titan Heart, 75 x 73 x 5.5 cm), a mortar mixing tub (available in DIY stores) or a commercially available “underbed drawer” is best suited. It should be cleaned with Floralife® Cleaner and the water level in the vessel should be as high as possible. If it is not possible to lay the product completely flat on the water with the foam side, water it by holding it vertically and (in the case of the heart, with the tip of the heart first) slowly immersing it deeply into the tub until the lower half of the product has become saturated with water. Then turn the product over to water the upper half in the same way.

For watering large rings or wreaths, a long balcony box is the ideal watering container. Water the ring or wreath by placing it on end in the balcony box. Once the part of the product standing in the water has soaked up water, turn the ring/wreath to water the next part. Continue until the ring/wreath is fully watered.